Aon Desktop Drive Enclosure
Part Number: QTL3178, QTL3271, QTL3344
Product Details
The Aon Desktop Drive Enclosure is a desktop tester from Quarch that combines all the major elements you need to test an SSD:
- Full control of data lanes, power, and sidebands (As with our breakers)
- Power and digital sideband capture (As with our PAM range)
- Power injection port for voltage margining (with a PPM)
- Controllable cooling
Putting this all into a single tester allows us to combine all the features while minimising the signal path. There is no re-driving or re-timing in the PCIe signal path, so the SSD can be tested as if it were directly connected to the host.
Multiple versions are available with varying feature sets to suit your budget and requirements.
The enclosure is designed to connect to a Serial Cables host card or another MCIO-based controller.
A huge range of tests can be run (and easily automated):
Contact your local reseller or email support@quarch.com
Quarch Drive Power Testing
Features
- Hot-plug timing sequences, including pin-bounce
- Sideband failure
- Lane width restriction
- Data and sideband glitch
- Refclk isolation
- SMBUS isolation / lockup
- Power Vs Performance capture
- Sideband capture and debugging
- Controllable cooling
Technical
- Supports PCIe devices up to Gen6 speeds
- Supports devices up to x8 lane width
- 1us timing resolution on all switches
- 50ns PRBS or user-sequenced glitch pulses
- 25W maximum device rating for continuous use
- Direct LAN and USB control (no additional controller required)
- External TTL trigger in/out to external devices
- PPM injection port for use with PPM (QTL1999 and similar)
- PWM controlled fan with manual control
Versions
QTL3178
GEN6 Drive Enclosure x8 MCIO to EDSFF x8-0
8 PCIe lanes, all directly routed (so PCIe data is always connected)
QTL3271
GEN6 Drive Enclosure x8 MCIO to EDSFF x8-8
8 PCIe lanes, all with individual switching
QTL3344
GEN6 Drive Enclosure x8 MCIO to EDSFF x4-4
4 PCIe lanes, all with individual switching
Part Number Additions
Add KIT_E1 or KIT_E3 to specify the enclosure size
Add /PAM to add power and sideband analysis
Evaluate this product
Evaluate now
