Gen6 AIC x16 Slot Injection Fixture
Part Number: QTL3157
Product Details
The Gen6 AIC x16 Slot Injection Fixture is a power module that injects power into a PCIe Gen6 Card. This simple interposer fits in an x16 PCIe slot and allows power to be injected into the attached PCIe card. It now supports slot-based devices at up to Gen6 speeds
Connected to one of our range of Programmable Power Modules, you can perform power margining and measurement of the drive while using it within its normal operating environment.
The interposer synchronises with the host power to ensure your PCIe device is powered up at exactly the correct time.
The new triggering feature allows sync with the PPM. With this in place, you can configure a ramp-up profile on the PPM and run it in sync with the host power turning on. This allows complex power tests to be run while ensuring that the device will enumerate correctly
Features
- Connects a Quarch PPM to a PCIe AIC slot device
- It works with almost any standard PCIe device within the Power Module current limits
- Supports dual rail 12V/3V3 devices.
- Power sync ensures devices turn on with the host
- Allows detailed power analysis tests, power margining, and much more
Technical
- Supports PCIe AIC devices up to GEN6 speeds
- 60cm cable supplied to route to the Power Module
- Switchable voltage monitoring between 3V3 and 3V3 AUX rails
- Host power sync ensures the DUT powers up correctly. Jumpers can disable power sync per rail
- SMBUS probe points on the fixture
- Trigger out port allowing host power detect to act as a trigger to an external device such as the PPM
Evaluate this product
Evaluate now
