Power testing, hot-swap automation and fault injection for M.2 products
The difficulty of getting a hot-swap/injection fixture into a native M.2 slot is easily overcome with Quarch’s new, comprehensive range of native M.2 (M-Key) products.
Using a vertical M.2 connector, you can now fit a breaker module or power injection fixture into almost any standard M.2 slot (80mm card length). Here are just some of the test processes these modules can help you with:
- Performing power margining and measurement of an M.2 device within its normal operating environment, using the M.2 M-Key Vertical Power Injection Fixture in combination with a Programmable Power Module
- Adapting a x4 PCIe slot to take an M.2 drive (perfect for test systems that don’t have a native M.2 slot), using the PCIe Slot to M.2 Power Injection Fixture
- Hot-swapping drives and glitching/breaking any of the signals, with full physical layer control over the interface, using the M.2 M-Key Vertical Card Module.